Community Pharmacist's Awareness, Knowledge and Attitude Towards use of Vitamin Supplements in Pimpri-Chinchwad Municipal Corporation (PCMC) Area of Pune, India: A Descriptive Cross Sectional Study.

Background: US FDA defines: dietary supplements is a product that intended to supplement a person's diet, it's generally consist of at least one or more of the following dietary ingredients, vitamin, minerals, a herb or other botanical and amino acid by increasing the daily consumptions of an extract metabolite concentration, constitute or combinations of these medication. Excessive and inappropriate use of medicines has been recognised as a public health problem resulting in increased likelihood of adverse drug event, drug interaction, and inappropriate drug prescribing and increased cost. Material and Methods: This was the cross-sectional study conducted in year 2022 at Pimpri Chinchwad (Pune). The total 250 questionaires are distributed and from that 226 response were received. Target population consist of community pharmacists working in the drug store in this area (n=226). Results: Data was represented in three domains of study i. e. awareness, knowledge and attitude. Correlation coefficient using Pearson's method were determined to evaluate strength of correlation between awareness-knowledge, Knowledge-attitude and awareness-attitude. Correlation coefficient were calculated by comparing most relevant and equal number of questions. Conclusion: The study demonstrated positive attitude among surveyed community pharmacists in Pune, India. There is lacuna in accurate and adequate awareness, knowledge and attitude of vitamin deficiency, efficiency, recommended daily allowance (RDA), toxicity and interactions among pharmacist as one of the stakeholders of healthcare in India. Few of the remedies viz. framing of guidelines, inclusion in formal education syllabus, continuous education, updation exams etc. may be of use.

Clozapine-laden carbon dots delivered to the brain via an intranasal pathway: Synthesis, characterization, ex vivo, and in vivo studies.

Clozapine, which is widely used to treat schizophrenia, shows low bioavailability due to poor solubility and high first-pass metabolism. The study aimed to design clozapine-loaded carbon dots (CDs) to enhance availability of the clozapine to the brain via intranasal pathway. The CDs were synthesized by pyrolysis of citric acid and urea at 200 °C by hydrothermal technique and characterized by photoluminescence, transmission electron microscopy (TEM), X-ray Photoelectron Spectrometer (XPS), and Fourier transform infrared spectrum (FTIR). The optimized clozapine-loaded CDs (CLZ-CDs-1:3-200) showed a quasi-spherical shape (9-12 nm) with stable blue fluorescence. The CDs showed high drug solubilization capacity (1.5 mg drug in 1 mg/ml CDs) with strong electrostatic interaction with clozapine (drug loading efficiency = 94.74%). The ex vivo release study performed using nasal goat mucosa showed sustained release of clozapine (43.89%) from CLZ-CDs-1:3-200 for 30 h. The ciliotoxicity study (histopathology) confirmed no toxicity to the nasal mucosal tissues using CDs. In the rat model (in vivo pharmacokinetic study), when CDs were administrated by the intranasal route, a significantly higher concentration of clozapine in the brain tissue (Cmax = 58.07 ± 5.36 µg/g and AUCt (µg/h*g) = 105.76 ± 12.31) was noted within a short time (tmax = 1 h) compared to clozapine suspension administered by intravenous route (Cmax = 20.99 ± 3.91 µg/g, AUC t (µg/h*g) = 56.89 ± 12.31, and tmax = 4 h). The high value of drug targeting efficiency (DTE, 486%) index and direct transport percentage (DTP, 58%) indicates the direct entry of clozapine-CDs in the brain via the olfactory route. In conclusion, designed CDs demonstrated a promising dosage form for targeted nose-to-brain delivery of clozapine for the effective treatment of schizophrenia.

Biodiesel production and exploring properties of Datura stramonium L. oil with its optimization using combined approaches-Taguchi, grey relational analysis, and response surface methodology.

Biodiesel production through the synthesis of Datura stramonium L. oil is studied to explore the most efficient approaches to suggest an alternate feedstock for biodiesel production. The main objective of this work is to optimize the process variables of biodiesel synthesis by using some statistical approach (Taguchi method, grey relational analysis (GRA), and response surface methodology (RSM) analyzing three parameters, i.e., alcohol-to-oil molar ratio, catalyst (NaOH) concentration, and process temperature for achieving maximum biodiesel derived from Datura stramonium L. oil. The transesterification process is applied by using an ultrasonic-assisted technique. Grey relational analysis (GRA) was successfully applied with the Taguchi method resulting in the optimum combination of A2B1C1. Based on the findings, the best operating conditions for transesterifying are attained with the RSM approach consisting of a 5.697:1 molar ratio (level 2), 0.3 (wt.%) NaOH concentration (level 1), and 70 °C process temperature (level 1). With a value of 87.02%, these ideal operating conditions produce the maximum yield as compared to grey relational analysis (GRA) yields 83.99%. The obtained results have been verified through the characterization of oil and biodiesel as well. Also, the fuel qualities of DSL biodiesel were identified and assessed. DSL oil was found 137.6 degrees of unsaturation during fatty acid profile analysis. DSL biodiesel was found the best kinematic viscosity (4.2 mm2/s) and acid value (0.49) when compared to Karanja and palm biodiesel. D. stramonium L. was recognized as a suitable species for biodiesel feedstock according to the findings.

Design of cobalt-doped graphene quantum dot-decorated vanadium pentoxide nanosheet-based Off-On fluorescent sensor system for tiopronin sensing.

Despite the high medicinal value of tiopronin, there are substantial adverse effects such as yellow skin, yellow eyes, muscle aches, etc. Therefore, there is a huge necessity to identify tiopronin using advanced sensors in provided samples. Recently, the preference for graphene quantum dots (GQDs) and inorganic nanomaterial-based fluorescent sensors for the detection of pharmaceuticals has been extensively documented due to their plentiful advantages. Therefore, in this work, the cobalt-doped GQDs decorated vanadium pentoxide nanosheet-based fluorescence switch 'Off-On' sensor (Co-GQDs@V2O5-NS) was designed for highly sensitive and selective detection of tiopronin. Briefly, the green synthesis of highly fluorescent Co-GQDs was carried out using a hydrothermal method. Meanwhile, the synthesis of V2O5-NS was synthesized using the liquid exfoliation method. The synthesis of Co-GQDs@V2O5-NS was accomplished wherein Co-GQDs adsorbed on the surface of V2O5-NS that offered the quenching of fluorescence of Co-GQDs. Afterward, the addition of tiopronin into the quenched probe disclosed the proportional recovery of fluorescence of Co-GQDs. Here, the addition of tiopronin provides the decomposition of V2O5-NS and conversion into the V4+ that aids in releasing the quenched fluorescence of Co-GQDs. The limit of detection and linearity range for tiopronin was found to be 1.43 ng/mL and 10-700 ng/mL, respectively. Moreover, it demonstrated high selectivity, good stability at experimental conditions, and practicality in analyzing tiopronin in spiked sample analysis. Hence, the designed Co-GQDs@V2O5-NS nanosized sensor enables high sensitivity, selectivity, simplicity, label-free, and eco-friendly tiopronin recognition. In the future, the utility of Co-GQDs@V2O5-NS can open a new door for sensing tiopronin in provided samples.

Development of a highly sensitive fluorescent probe using Delonix regia (Gulmohar) tree pod shell for precise sarcosine detection in human urine samples: advancing prostate cancer diagnosis.

We designed a highly sensitive fluorescent sensor for the early detection of sarcosine, a potential biomarker for prostate cancer. This sensor was based on surface-cobalt-doped fluorescent carbon quantum dots (Co-CD) using a FRET-based photoluminescent sensing platform. Blue luminescent carbon quantum dots (CQD) were synthesised through a hydrothermal approach, utilizing Delonix regia tree pod shells. Cobalt was employed to functionalize the CQD, enhancing the quantum-entrapped effects and minimizing surface flaws. To optimize Co-CD preparation, we employed a Box-Behnken design (BBD), and response surface methodology (RSM) based on single-factor experiments. The Co-CD was then used as a fluorescent probe for selective Cu2+ detection, with Cu2+ quenching Co-CD fluorescence through an energy transfer process, referred to as 'turn-off'. When sarcosine was introduced, the fluorescence intensity of Co-CD was restored, creating a 'turn-on' response. The sensor exhibited a Cu2+ detection limit (LOD) of 2.4 µM with a linear range of 0 µM to 10 µM. The sarcosine detection in phosphate buffer saline (PBS, pH 7.4) resulted in an LOD of 1.54 µM and a linear range of 0 to 10 µM. Importantly, the sensor demonstrated its suitability for clinical analysis by detecting sarcosine in human urine. In summary, our rapid and highly sensitive sensor offers a novel approach for the detection of sarcosine in real samples, facilitating early prostate cancer diagnosis.Communicated by Ramaswamy H. Sarma.

Formulation of lactoferrin decorated dextran based chitosan-coated europium metal-organic framework for targeted delivery of curcumin.

Hepatocellular carcinoma (HPTC) currently ranks as the third leading cause of cancer-related mortality, necessitating an advanced formulation strategy. Recently, lactoferrin (Lf) has been utilized as a specific targeting ligand in HPTC due to its high specificity towards the asialoglycoprotein receptor expressed in cancer cells. Therefore, we present the fabrication of an Lf-decorated carboxymethyl dextran-encased chitosan-coated europium metal-organic framework-based nanobioconjugate (Lf-CMD-CS-CUR@Eu-MOF) for targeted curcumin (CUR) delivery. Briefly, CUR was loaded into Eu-MOF, followed by coating cationic 'CS' on the CUR@Eu-MOF surface. Simultaneously, Lf-decorated CMD was prepared via an esterification reaction. Subsequently, Lf-CMD-CS-CUR@Eu-MOF was synthesized using the Maillard reaction. Various spectral characterizations, drug entrapment, drug content, in vitro drug release, biocompatibility and cell cytotoxicity studies were performed. It exhibited an entrapment efficiency of 88.87 ± 2.1 %, a drug content of 3.45 ± 0.98 %, and a drug loading rate of 34.85 ± 0.6 mg/g. Furthermore, the Lf-CMD-CS-CUR@Eu-MOF exhibits excellent biocompatibility with normal cells. The in vitro dissolution study confirmed a release of 78.12 % of 'CUR' in pH 5.8 phosphate buffer (over 120 h), attributed to the controlled release rate by the 'CS' coating on the surface of CUR@Eu-MOF. The BEL-7402 cell line showed concentration-dependent toxicity of nanobioconjugate to cancerous cells. Therefore, when 'Lf' is surface-decorated onto an appropriate polymeric material, it gains the capability to function as a carrier for transporting 'CUR' to the precise target site within HPTC. In conclusion, Lf-CMD incorporated CS-coated Eu-MOF can provide a promising approach for targeted drug delivery in HPTC management.

Design of lactoferrin functionalized carboxymethyl dextran coated egg albumin nanoconjugate for targeted delivery of capsaicin: Spectroscopic and cytotoxicity studies.

The increased mortality rates associated with colorectal cancer highlight the pressing need for improving treatment approaches. While capsaicin (CAP) has shown promising anticancer activity, its efficacy is hampered due to low solubility, rapid metabolism, suboptimal bioavailability, and a short half-life. Therefore, this study aimed to prepare a lactoferrin-functionalized carboxymethyl dextran-coated egg albumin nanoconjugate (LF-CMD@CAP-EGA-NCs) for the targeted CAP delivery to enhance its potential for colorectal cancer therapy. Briefly, LF-CMD was synthesized through an esterification reaction involving LF as a receptor and CMD as a shell. Concurrently, CAP was incorporated into an EGA carrier using gelation and hydrophobic interactions. The subsequent production of LF-CMD@CAP-EGA-NCs was achieved through the Maillard reaction. Spectral characterizations confirmed the successful synthesis of smooth and spherical-shaped LF-CMD@CAP-EGA-NCs using LF-CMD and EGA-CAP nanoparticles, with high entrapment efficiency and satisfactory drug content. Furthermore, LF-CMD@CAP-EGA-NCs demonstrated a sustained release of CAP (76.52 ± 1.01 % in 24 h, R2 = 0.9966) in pH 5.8 buffer with anomalous transport (n = 0.68) owing to the shell of the CMD and EGA matrix. The nanoconjugate exhibited enhanced cytotoxicity in HCT116 and LoVo cell lines, which is attributed to the overexpression of LF receptors in colorectal HCT116 cells. Additionally, LF-CMD@CAP-EGA-NCs demonstrated excellent biocompatibility, as observed in the FHC-CRL-1831 cell line. In conclusion, LF-CMD@CAP-EGA-NCs can be considered as a promising approach for targeted delivery of CAP and other anticancer agents in colorectal cancer treatment.

Zinc metal-organic frameworks- graphene quantum dots nanocomposite mediated highly sensitive and selective fluorescence "On-Off-On" probe for sensing of quercetin.

Presently, there is a necessity to design novel methods because of quercetin's significant biological relevance. Therefore, we developed the rose petal-derived graphene quantum dots embedded zinc metal organic frameworks (RP-GQDs@Zn-MOFs) based fluorescence "On-Off-On" nanoprobe for quercetin sensing. Initially, RP-GQDs were synthesized using rose petal waste and then subjected to embedding into Zn-MOFs. Herein, the addition of copper ions (Cu2+) results in fluorescence "Switch Off" whereas quercetin inclusion resulted in the formation of the quercetin-Cu2+ complex. It regains the RP-GQDs@Zn-MOFs quenched fluorescence termed as "Switch On" because of the static quenching mechanism. It demonstrated a wide concentration range and low detection limit of 100 ng/mL to 1400 ng/mL (R2=0.99) and 37.84 ng/mL, respectively. The selectivity study shows the high specificity for quercetin in presence of interfering compounds because of Cu2+ coordination between the carbonyl oxygen atom and the 3-OH group of quercetin. Moreover, the designed probe shows good stability, repeatability, and real-time analysis possibility.

Functionalized Graphene Quantum Dots (GQDs) based Label-Free Optical Fluorescence Sensor for CD59 Antigen Detection and Cellular Bioimaging.

Cluster of differentiation (CD59), a cell surface glycoprotein, regulates the complement system to prevent immune damage. In cancer, altered CD59 expression allows tumors to evade immune surveillance, promote growth, and resist certain immunotherapies. Targeting CD59 could enhance cancer treatment strategies by boosting the immune response against tumors. Herein, we present a one-step synthesis of Polyethyleneimine (PEI) functionalized graphene quantum dots (Lf-GQDs) from weathered lemon leaf extract. The fabricated Lf-GQDs were successfully used for the quantitative detection of the cluster of CD59 antigen that is reported for its expression in different types of cancer. In this work, we utilized orientation-based attachment of CD59 antibody (Anti-CD59). Our findings reveal that, instead of using random serial addition of antigen or antibody, oriented conjugation saves accumulated concentration offering greater sensitivity and selectivity. The Anti-CD59@Lf-GQDs immunosensor was fabricated using the oriented conjugation of antibodies onto the Lf-GQDs surface. Besides, the fabricated immunosensor demonstrated detection of CD59 in the range of 0.01 to 40.0 ng mL-1 with a low detection limit of 5.3 pg mL-1. Besides, the cellular uptake potential of the synthesized Lf-GQDs was also performed in A549 cells using a bioimaging study. The present approach represents the optimal utilization of Anti-CD59 and CD59 antigen. This approach could afford a pathway for constructing oriented conjugation of antibodies on the nanomaterials-based immunosensor for different biomarkers detection.

Microfluidic based continuous enzyme immobilization: A comprehensive review.

Conventional techniques for enzyme immobilization suffer from suboptimal activity recovery due to insufficient enzyme loading and inadequate stability. Furthermore, these techniques are time-consuming and involve multiple steps which limit the applicability of immobilized enzymes. In contrast, the use of microfluidic devices for enzyme immobilization has garnered significant attention due to its ability to precisely control immobilization parameters, resulting in highly active immobilized enzymes. This approach offers several advantages, including reduced time and energy consumption, enhanced mass-heat transfer, and improved control over the mixing process. It maintains the superior structural configuration in immobilized form which ultimately affects the overall efficiency. The present review article comprehensively explains the design, construction, and various methods employed for enzyme immobilization using microfluidic devices. The immobilized enzymes prepared using these techniques demonstrated excellent catalytic activity, remarkable stability, and outstanding recyclability. Moreover, they have found applications in diverse areas such as biosensors, biotransformation, and bioremediation. The review article also discusses potential future developments and foresees significant challenges associated with enzyme immobilization using microfluidics, along with potential remedies. The development of this advanced technology not only paves the way for novel and innovative approaches to enzyme immobilization but also allows for the straightforward scalability of microfluidic-based techniques from an industrial standpoint.

The isocyanide SN2 reaction.

The SN2 nucleophilic substitution reaction is a vital organic transformation used for drug and natural product synthesis. Nucleophiles like cyanide, oxygen, nitrogen, sulfur, or phosphorous replace halogens or sulfonyl esters, forming new bonds. Isocyanides exhibit unique C-centered lone pair σ and π* orbitals, enabling diverse radical and multicomponent reactions. Despite this, their nucleophilic potential in SN2 reactions remains unexplored. We have uncovered that isocyanides act as versatile nucleophiles in SN2 reactions with alkyl halides. This yields highly substituted secondary amides through in situ nitrilium ion hydrolysis introducing an alternative bond break compared to classical amide synthesis. This novel 3-component process accommodates various isocyanide and electrophile structures, functional groups, scalability, late-stage drug modifications, and complex compound synthesis. This reaction greatly expands chemical diversity, nearly doubling the classical amid coupling's chemical space. Notably, the isocyanide nucleophile presents an unconventional Umpolung amide carbanion synthon (R-NHC(-) = O), an alternative to classical amide couplings.

Stimuli-Responsive Design of Metal-Organic Frameworks for Cancer Theranostics: Current Challenges and Future Perspective.

Scientific fraternity revealed the potential of stimuli-responsive nanotherapeutics for cancer treatment that aids in tackling the major restrictions of traditionally reported drug delivery systems. Among stimuli-responsive inorganic nanomaterials, metal-organic frameworks (MOFs) have transpired as unique porous materials displaying resilient structures and diverse applications in cancer theranostics. Mainly, it demonstrates tailorable porosity, versatile chemical configuration, tunable size and shape, and feasible surface functionalization, etc. The present review provides insights into the design of stimuli-responsive multifunctional MOFs for targeted drug delivery and bioimaging for effective cancer therapy. Initially, the concept of cancer, traditional cancer treatment, background of MOFs, and approaches for MOFs synthesis have been discussed. After this, applications of stimuli-responsive multifunctional MOFs-assisted nanostructures that include pH, light, ions, temperature, magnetic, redox, ATP, and others for targeted drug delivery and bioimaging in cancer have been thoroughly discussed. As an outcome, the designed multifunctional MOFs showed an alteration in properties due to the exogenous and endogenous stimuli that are beneficial for drug release and bioimaging. The several reported types of stimuli-responsive surface-modified MOFs revealed good biocompatibility to normal cells, promising drug loading capability, target-specific delivery of anticancer drugs into cancerous cells, etc. Despite substantial progress in this field, certain crucial issues need to be addressed to reap the clinical benefits of multifunctional MOFs. Specifically, the toxicological compatibility and biodegradability of the building blocks of MOFs demand a thorough evaluation. Moreover, the investigation of sustainable and greener synthesis methods is of the utmost importance. Also, the low flexibility, off-target accumulation, and compromised pharmacokinetic profile of stimuli-responsive MOFs have attracted keen attention. In conclusion, the surface-modified nanosized design of inorganic diverse stimuli-sensitive MOFs demonstrated great potential for targeted drug delivery and bioimaging in different kinds of cancers. In the future, the preference for stimuli-triggered MOFs will open a new frontier for cancer theranostic applications.

Platinum-alginate-chitosan nanobioconjugate decorated carbon backbone layered biosensor for highly sensitive and selective detection of BACE-1.

Chitosan (CS) and sodium alginates (SA) have been revealed for the design of layer-by-layer (LbL) assembly to develop pharmaceutical dosage forms owing to their versatile characteristics. Recently, the preference for unique LbL assemblies in biosensor development has offered the modified performance for detection interest analyte. Beta (ß)-site amyloid precursor protein-cleaving enzyme 1 (BACE-1) is a pivotal biomarker of Alzheimer's disease (AD) and demands high sensitivity and selective identification for the early-stage diagnosis. In this work, CS-SA­platinum nanoparticles (Pt-NPs) LbL-based nanobioconjugate decorated carbon backbone-layered affinity surface plasmon resonance (Anti-BACE-1-LbL@Pt-NPs-GO-SPR) biosensor was designed for extremely sensitive and selective sensing of BACE-1. Primarily, LbL nanobioconjugate was synthesized by integrating cationic 'CS' and anionic 'SA' on the face of green-made Pt-NPs. Here, the amines of 'CS' offers a softer surface for anti-BACE-1 immobilization that leads to maintaining the bio-functionality of bioreceptors, provides the specific orientation for bioreceptors, etc. As well, the synthesized graphene oxide (GO, 2D carbon backbone) was preferred as non-plasmonic nanomaterials due to their plenty of merits in biosensors. Here, the designed biosensor provides a low detection limit (LOD) of 5.63 fg/mL and a wide linear range from 5 fg/mL to 150 ng/mL. Moreover, selectivity and real-time analyses in spiked samples exhibited their practical usefulness in complex specimens for BACE-1 detection. Hence, the decorating of antibody-immobilized CS-SA coated Pt-NPs nanobioconjugate on the face of GO has various benefits mainly extremely sensitive and superb specificity. Overall, CS and SA coated Pt-NPs bioconjugate decorated GO layered SPR biosensors can provide highly sensitive, selectivity, rapid, label-free, etc. detection of BACE-1 in clinical samples.

Magnetic nanoflowers: a hybrid platform for enzyme immobilization.

The use of organic-inorganic hybrid nanoflowers as a support material for enzyme immobilization has gained significant attention in recent years due to their high stability, ease of preparation, and enhanced catalytic activity. However, a major challenge in utilizing these hybrid nanoflowers for enzyme immobilization is the difficulty in handling and separating them due to their low density and high dispersion. To address this issue, magnetic nanoflowers have emerged as a promising alternative enzyme immobilization platform due to their easy separation, structural stability, and ability to enhance catalytic efficiency. This review focuses on different methods for designing magnetic nanoflowers, as well as future research directions. Additionally, it provides examples of enzymes immobilized in the form of magnetic nanoflowers and their applications in environmental remediation, biosensors, and food industries. Finally, the review discusses possible ways to improve the material for enhanced catalytic activity, structural stability, and scalability.

Magnetic nanoflowers can be used as a novel platform for enzyme immobilization.There are three different approaches to the synthesis of efficient magnetic nanoflower.The magnetic nanoflowers provides excellent stability and good reusability of enzymes.The hybrid biocatalyst was applied in biotransformation, environmental, and food applications.The challenges and their remedies of hybrid biocatalyst have been discussed.

Rhodamine 6G derivative for the selective copper detection and remediation using nanoporous diatomaceous earth-engineered functional receptor.

A rhodamine-derived receptor was synthesized and comprehensively characterized for structural confirmation. The receptor was able to distinguish the copper ions (Cu2+) from other competing cations. The yellow color of the receptor changed to pink upon adding Cu2+ ions, however, other competing cations ions were impotent towards any color variation. The UV-visible titration studies revealed the binding stoichiometry of a 1:1 ratio with a detection limit of 9.663 × 10-8 M. Additionally, a novel idea of the work resides in the use of diatom for the practical application, where the receptor has been tethered on nanoporous diatomaceous earth microparticles (P2D) to remove Cu2+ ions. The results confirmed that 50 mg receptor functionalized DE could adsorb 10 mL of 1 ppm Cu2+ ions from water. Furthermore, a proof-of-concept device that is inexpensive, simple to operate, and continuously removes Cu2+ ions from water has been developed. The efficiency of the device in Cu2+ ion removal could be realized through the naked eye by observing the color change of P2D particles, which has excellent potential for application in remote locations where water contamination is a significant issue.

Poly(allylamine) coated layer-by-layer assembly decorated 2D carbon backbone for highly sensitive and selective detection of Tau-441 using surface plasmon resonance biosensor.

The determination of clinically significant amounts of tau protein in bodily fluids is a major problem in Alzheimer's disease (AD) diagnosis. As a result, the present work aims to develop a simple, label-free, fast, highly sensitive, and selective 2D carbon backbone graphene oxide (GO) patterned surface plasmon resonance (SPR) mediated affinity biosensor for Tau-441 monitoring. Initially, non-plasmonic nanosized GO was made using a modified Hummers' method, whereas green synthesized gold nanoparticles (AuNPs) were subjected to a layer-by-layer (LbL) design employing anionic and cationic polyelectrolytes. Several spectroscopical evaluations were carried out to ensure the synthesis of GO, AuNPs, and LbL assembly. Following that, the Anti-Tau rabbit antibody was immobilized on the designed LbL assembly using carbodiimide chemistry, and various studies such as sensitivity, selectivity, stability, repeatability, spiked sample analysis, etc., were conducted using the constructed affinity GO@LbL-AuNPs-Anti-Tau SPR biosensor. As an output, it shows a broad concentration range and a very low detection limit of 150 ng/mL to 5 fg/mL and 13.25 fg/mL, respectively. The remarkable sensitivity of this SPR biosensor represents the merits of a combination of plasmonic AuNPs and a non-plasmonic GO. It also exhibits great selectivity for Tau-441 in the presence of interfering molecules, which may be because of the immobilization of the Anti-Tau rabbit on the surface of the LbL assembly. Furthermore, it ensured high stability and repeatability, while spiked sample analysis and AD-induced animal samples analysis confirmed the practicability of GO@LbL-AuNPs-Anti-Tau SPR biosensor for Tau-441 detection. In conclusion, fabricated sensitive, selective, stable, label-free, quick, simple, and minimally invasive GO@LbL-AuNPs-Anti-Tau SPR biosensor will provide an alternative for AD diagnosis in the future.

Biosynthesis of Iron Oxide Nanoparticles Using Leaf Extract of Ruellia tuberosa: Mechanical and Dynamic Mechanical Behaviour Kevlar-Based Hybrid Epoxy Composites.

One of the more enticing, ecologically responsible, as well as safe and sustainable methodologies is eco-friendly nanomaterial synthesis. Vegetation materials will be used as reductants instead of toxic substances for synthesising nanoparticles. The current study used Ruellia tuberosa (RT) leaf extract digest to synthesise FeO nanomaterials, which were then characterised using XRD. Following that, microbially produced FeO molecules were mixed with a Kevlar-based polymeric matrix to study the blended consequences. To examine the interbreeding, the current experimental analyses were performed, including both static and dynamic mechanical characteristics. The addition of FeO nanofillers improved the elastic modulus, tensile strength, and storage modulus of the nanocomposite. Impact force uptake has been raised to a certain extent by the addition of nanoparticles. The findings of this research show that incorporating FeO nanofillers into Kevlar fabrics is a promising technique for increasing the mechanical characteristics of hybrid laminated composites. As per DMA evaluation, the sample without nanomaterials had a more volcanic lava response, which is a useful thing for body systems for missile use. Another critical aspect of a nanoparticles-filled nanocomposite that must be addressed is the relatively uniform scattering of padding as well as the development of interfacial adhesion in such a combination. The presence of FeO fillers in polymeric composites is confirmed by XRD analysis.

Biosynthesis-Based Al2O3 Nanofiller from Cymbopogon citratus Leaf/Jute/Hemp/Epoxy-Based Hybrid Composites with Superior Mechanical Properties.

Metallic nanoparticles (NPs) manufactured by ecofriendly strategies have also received much interest because of their elastic scattering properties and performance in nanomaterials. Aluminium oxide nanomaterials stand out among nanomaterials due to their tremendous uses in ceramic products, fabrics, therapeutic agents, catalyst supports, sewage sludge, and biosensors. The current paper investigates the effect of the nanoparticle composition and layer sequential on the mechanical characteristics of jute (J)-hemp (H) incorporated with an aluminium oxide polymer composite. NaOH is used to change the physical aspects of both plant fibres. A total of 20 specimens were tested with varying stacking sequences and padding weight ratios. Mechanical properties like a nanocomposite's tension, bending, and ILSS was measured. Stacked series and flowability substantially impact the nanocomposite. The Group 3 nanocomposite with 2% Al2O3 has the highest tensile strength, 54.28% of the Group 1 and 2 combinations. The stack series significantly influences the material properties of nanomaterials. Because of the alternating layers of natural fabrics, Group 4 specimens have the maximum flexural strength. Group 3 composite materials have the highest ILSS because they have hemp on the outermost surface. It has been discovered that Group 4 material with a 2% Al2O3 concentration is possibly the most substantial material. The existence of Al2O3 nanoparticles in the green synthesis was confirmed by XRD analysis.

Awareness, perspectives and satisfaction levels among patients with psoriatic arthritis: a multicentric cross-sectional survey.

Perception of the disease and its management impacts patients with Psoriatic arthritis (PsA) to a great degree. Studies examining patients' viewpoints and perception of their disease and its management are scarce. This multicentric cross-sectional survey was undertaken to understand the perspectives of patients with PsA. A survey questionnaire with items on demographics, awareness about their disease, treatment, physical therapy, quality of life and satisfaction with the care received was designed. After internal and external validation, a pilot survey was conducted, and the questionnaire was finalized. The final survey (with translations in local languages) was carried out at 17 centres across India. There were 262 respondents (56% males) with mean age of 45.14 ± 12.89 years. In 40%, the time lag between onset of symptoms and medical assessment for it was more than a year. In most of the patients, the diagnosis of PsA was made by a rheumatologist. Over 83% of patients were consulting their rheumatologist periodically as advised and fully compliant with the treatment. Lack of time and cost of therapy were the most common reasons for non-adherence to therapy. Eighty-eight patients (34%) were not fully satisfied with their current treatment. Over two-third of patients had never seen a physiotherapist due to barriers including a lack of time, pain, and fatigue. The daily activities and employment status were affected in nearly 50% of patients with PsA. The current survey has identified a gap in patients' awareness levels and helps healthcare providers in understanding the varied perceptions of patients with PsA. Addressing these issues in a systematic manner would potentially improve the treatment approaches, outcomes, and patient satisfaction levels.